Active EMC Filter for DC/DC Converters – FI-B10T(D)-R2
Introduction
MORNSUN recently released the new active EMC filter for DC/DC converter in SMD (FI-B10T-R2) and DIP (FI-B10D-R2) packages to help improve the EMI performance. Their maximum operating current is up to 10A.
Advantages
High CM/DM Insertion Loss of FI-B10T-R2: 20dB
1. Used with MORNSUN DC/DC converter JVRF24_DD-50WR4 series, the power supply EMI performance can be improved to meet the GJB151B military grade (CE102) requirements.
2. Used with MORNSUN DC/DC converter URB24_LD-60WR3 series, the power supply EMI performance can be improved to meet the CISPR32/EN55032 Class B requirements.
High CM/DM Insertion Loss of FI-B10D-R2: 20dB
1. Used with MORNSUN DC/DC brick power supply VCB48_EBO-300WFR3 series for Telecom, the power supply EMI performance can be improved.
2. Used with MORNSUN DC/DC converter URB24_LD-60WR3 series, the power supply EMI performance can be improved.
Ultra-small size
1. FI-B10T-R2: 25*25*5mm, volume decreased by more than 80% compared with the same series of products.
2. FI-B10D-R2: 25.4*25.4*11.5mm
Applications
The active EMC filter FI-B10T(D)-R2 Series can be used with MORNSUN DC/DC power supplies for the applications of industrial control, electric power, instrumentation, communication and other fields.
Features
Ultra wide input voltage range: 9 - 80VDC
Small size:
[FI-B10T-R2] 25*25*5mm;
[FI-B10D-R2] 25.4*25.4*11.5mm
Operating temperature range: -40℃ to +105℃
Compliance with safety standards: IEC62368
Meet 5000m altitude requirement
Recommended solutions
JVRF24_DD-50WR4 is used with FI-B10T-R2 to meet GJB151B CE102.
URB24_LD-60WR3 is used with FI-B10T-R2 to meet EN55032 CLASSB.
URB24_LD-60WR3 is used with FI-B10D-R2 to meet EN55032 CLASSB.
VCB48_EBO-300WFR3-N is used with FI-B10D-R2 to meet EN55032 CLASSB.
